The use of laser radiations in clinics that treat vein problems has been on increase. Given all methods of removing unwanted vessels, many patients will prefer the use of laser rays. The use of other techniques like sclerotherapy as well as surgical processes has decreased since this method was approved for application in medical processes around fifteen years ago. If all safety measures are to be observed and good results obtained, then laser vein removal Cincinnati need to be carried out by an accredited professional.
Semiconductor diode lasers are the ones applied for most clinical applications since they emit reliable amounts of light. During the procedure, the device produces high energy pulses in presence of an appropriate skin cooler which are directed to the vessels to be treated. The principle applied in the process is that of selective photothermolysis. The selective nature of oxyhemoglobin to absorb light energy is combined with the suitable pulse durations that correspond to the time of relaxation of the thermal target.
Studies have established the suitable wavelength of laser light that should be applied in treating blood vessels that have defects. At this specific wavelength, energy will be transmitted to the target cells which transfers heat to vascular epithelium and thus allowing for the wall of the vessel to get denatured. The set wavelength is such that less or no energy is absorbed by cells not targeted such as melanin.
If shorter light wavelength than the standard value is applied, energy will be absorbed by melanin which will result to hair reduction on the area involved which is not the objective. Side effects in the epidermis can be eliminated by applying waves with the suitable characteristics. Applying a wave of low frequency will also ensure that more energy will get to the target cells as there is increased penetration.
The device applied in the treatment should be used in accordance to the guidelines put in place by medical authorities as advised by manufacturers. The lasers applied for vein treatment have got a hand piece that incorporates a cooler. The chilling component should be on all the times treatment is going on.
The hand piece of the light device should touch the skin surface gently at time of vessel elimination. Application of pressure should be avoided as much as possible. Little pressure will compress the vessels such that fewer cells are available to tap the light rays. This in turn will lower the overall efficiency of the process.
Laser light has been established as a safe and effective way of eliminating unwanted veins. The method responds better for patients with purple or blue vessels but with it also works with those with red ones so long as the appropriate measures are put in place. Multiple treatments are required for full clearance of spider vessels.
Application of radiation in doing away with unwanted vessels is a painless process. It will be performed while the patient is awake and no need of general or spinal anesthetic. Overall circulation becomes better as blood is redirected to vessels that have one way valves that are working.
Semiconductor diode lasers are the ones applied for most clinical applications since they emit reliable amounts of light. During the procedure, the device produces high energy pulses in presence of an appropriate skin cooler which are directed to the vessels to be treated. The principle applied in the process is that of selective photothermolysis. The selective nature of oxyhemoglobin to absorb light energy is combined with the suitable pulse durations that correspond to the time of relaxation of the thermal target.
Studies have established the suitable wavelength of laser light that should be applied in treating blood vessels that have defects. At this specific wavelength, energy will be transmitted to the target cells which transfers heat to vascular epithelium and thus allowing for the wall of the vessel to get denatured. The set wavelength is such that less or no energy is absorbed by cells not targeted such as melanin.
If shorter light wavelength than the standard value is applied, energy will be absorbed by melanin which will result to hair reduction on the area involved which is not the objective. Side effects in the epidermis can be eliminated by applying waves with the suitable characteristics. Applying a wave of low frequency will also ensure that more energy will get to the target cells as there is increased penetration.
The device applied in the treatment should be used in accordance to the guidelines put in place by medical authorities as advised by manufacturers. The lasers applied for vein treatment have got a hand piece that incorporates a cooler. The chilling component should be on all the times treatment is going on.
The hand piece of the light device should touch the skin surface gently at time of vessel elimination. Application of pressure should be avoided as much as possible. Little pressure will compress the vessels such that fewer cells are available to tap the light rays. This in turn will lower the overall efficiency of the process.
Laser light has been established as a safe and effective way of eliminating unwanted veins. The method responds better for patients with purple or blue vessels but with it also works with those with red ones so long as the appropriate measures are put in place. Multiple treatments are required for full clearance of spider vessels.
Application of radiation in doing away with unwanted vessels is a painless process. It will be performed while the patient is awake and no need of general or spinal anesthetic. Overall circulation becomes better as blood is redirected to vessels that have one way valves that are working.
About the Author:
You can visit www.cincymedspa.com for more helpful information about Details Pertaining Laser Vein Removal Cincinnati.
0 comments:
Post a Comment