It is now possible to achieve pediatric vision testing in a school setting or in medical fairs thanks to revolutionary vision testing device known as the vision screener. This is a device that works in amazing manner and is able to capture several details from the eyes, perform measurement and compare them to predetermined data and give back results in a fraction of a second. It is now common in health fairs, preschools and grade schools, medical institutions and may also be available in hands of pediatricians and family doctors as it is not restricted to opticians only.
With solid scientific background and support from several studies and testimonials published in medical journals, this is a device that has gain favor with several medical professionals, government agencies and non-governmental organizations alike. Currently, it is used by nurses in schools, pediatricians, opticians, members of the Lions club and many other professionals. The only required compliance is the camera fixation and there is a specially designed sound to achieve by provoking fixation.
The only required compliance is a short camera fixation. It has high level of accuracy and the results can be fully trusted. It is also able to screen two eyes all at once and the distance required for screening is about one meter or 3.3 feet from the camera. After just 0.8 seconds, the (PASS or REFER) results can be displayed on the screen automatically.
This simplicity in operation makes it possible for any ordinary person with no training to be able to perform the screening. When the person to be screened is in the correct position, the device trigger is pulled. This result to a unique sound that helps achieve fixation after which the images of eye balls are captured on a white triangle on the screen. Several measurements then follows after which the results can be displayed. The tolerance level is set at +-2 inches or +-5 centimeters.
Once the patient or a person to be screened is at the right distance from the camera; the operator then pulls the trigger which is followed by a unique sound used to help the patient focus at the device. The images of both eyes are then captured on a white screen after which the measurements of various parts are done automatically.
The diagnosis for astigmatism on the other hands depends on determination for cornea irregularities. For hyperopia and myopia, the farsightedness and nearsightedness are performed respectively. The pupil sizes are compared for anisocoria while the symmetry of eye alignment is necessary for the cornea reflex.
All the measurements are automatically performed followed by a PASS which indicates that all the measurements for all the conditions are within the normal range. In case one or more measurements does not fall within the normal range, the REFER measurement will be displayed.
This can either be a PASS that indicates that all measurements are within the normal range and hence none of the conditions has been detected. In case any of the measurement is not within the normal range, a REFER is the result displayed and it requires visiting the optician.
With solid scientific background and support from several studies and testimonials published in medical journals, this is a device that has gain favor with several medical professionals, government agencies and non-governmental organizations alike. Currently, it is used by nurses in schools, pediatricians, opticians, members of the Lions club and many other professionals. The only required compliance is the camera fixation and there is a specially designed sound to achieve by provoking fixation.
The only required compliance is a short camera fixation. It has high level of accuracy and the results can be fully trusted. It is also able to screen two eyes all at once and the distance required for screening is about one meter or 3.3 feet from the camera. After just 0.8 seconds, the (PASS or REFER) results can be displayed on the screen automatically.
This simplicity in operation makes it possible for any ordinary person with no training to be able to perform the screening. When the person to be screened is in the correct position, the device trigger is pulled. This result to a unique sound that helps achieve fixation after which the images of eye balls are captured on a white triangle on the screen. Several measurements then follows after which the results can be displayed. The tolerance level is set at +-2 inches or +-5 centimeters.
Once the patient or a person to be screened is at the right distance from the camera; the operator then pulls the trigger which is followed by a unique sound used to help the patient focus at the device. The images of both eyes are then captured on a white screen after which the measurements of various parts are done automatically.
The diagnosis for astigmatism on the other hands depends on determination for cornea irregularities. For hyperopia and myopia, the farsightedness and nearsightedness are performed respectively. The pupil sizes are compared for anisocoria while the symmetry of eye alignment is necessary for the cornea reflex.
All the measurements are automatically performed followed by a PASS which indicates that all the measurements for all the conditions are within the normal range. In case one or more measurements does not fall within the normal range, the REFER measurement will be displayed.
This can either be a PASS that indicates that all measurements are within the normal range and hence none of the conditions has been detected. In case any of the measurement is not within the normal range, a REFER is the result displayed and it requires visiting the optician.
About the Author:
You can visit www.henanmedical.com for more helpful information about Understanding How A Vision Screener Works.
0 comments:
Post a Comment